Description
The 7500 Series Epoxy Primers are a true 1:1 high build primer that delivers superior adhesion and exceptional corrosion resistance on a variety of substrates including properly prepared bare steel, aluminum, and OEM finishes.
- Color: Black (Gray and White also available)
- Size: Quart
- Mix one (1) part Epoxy Base to one (1) part 7503 Epoxy Catalyst (sold separately). Reduce 10-25% with High Teck 1070 Low VOC Reducer to maintain 2.1 VOC. May also use 7720 National Rule Reducer for areas not requiring low VOC compliance.
- Works as a high build primer at 10% reduction or sealer at 25% reduction
- Provides superior adhesion to all sanded and cleaned surfaces including galvanized steel, aluminum, and OEM finishes. No need to apply an acid etch primer.
- Formulated for maximum corrosion resistance
- Apply 1 - 2 medium wet coats, allowing 30 minutes between coats, 60 minutes to topcoat. Must be sanded after 36 hours.
- Dries to a true flat finish to maximize topcoat performance
- High solids (45% by wt), tintable formula, sands easily
- Fast drying, 30 min flash between coats, 60 min. to topcoat, 36 hr max open time
- Not suitable for raw plastic
- Clean up using High Teck Lacquer thinner or Zero VOC solvents